ESA highlights space in Europe's cars

October 30, 2002

Paris, 29 Oct 2002

Advanced space technology is being found more down-to-earth uses - even within the cars driven on Europe's roads.

The ESA conference 'Technology Exchange between Space and Automotive Industry' is to highlight how spin-offs from space are influencing the evolution of European automobiles, heralding improvements in safety, performance and power. It will take place 6 November at ESOC, Darmstadt in Germany.

"Space technology deals with the challenging conditions of launching and space operations," explained Dr. Ulf Merbold, ESA Utilization Promotion Manager. "These extreme environments are drivers for innovative solutions, which can then be applied elsewhere."

The automobile and aerospace industries shared early pioneers, and have other elements in common: "Parallels can be drawn between protection of a payload and a driver in a car," said Dr Pierre Brisson, Head of ESA's Technology Transfer and Promotion Office. "Everything has to be done to protect against dangerous factors, such as vibrations and impact."

The Prost Formula 1 team has reduced the vibrations its drivers endure during high-speed races. Prost achieved this using a dampening system first developed by Artec Aerospace for protecting satellite payloads during rocket launches.

A carbon composite material first designed to withstand the white-hot temperatures in Ariane rocket nozzles is now being utilised by Messier-Bugatti in high-performance brake systems for both Formula 1 and standard road vehicles.

In addition a novel sensor 'skin' originated by the Canadian Space Agency is to be fitted to automobile bumpers. Originally intended to improve the tactile sensitivity of orbital robots used to assemble the International Space Station it will also enable bumpers to detect what type of obstacle they run into. If the bumper hits a 'hard' object like a wall or car it will stay rigid, while if it hits a 'soft' object - like a human being - it will crumple.

"If a problem exists in industry, can ESA bring a space solution?" asked Brisson. "The answer is yes, if the problem is correctly described and explained."

Space technology also can play a role in the design process. Software first written to simulate the behaviour of space structures is now being used by BMW, Rover and others to model vehicle prototype behaviour.

Miniature engines and gears designed for precision satellite operation also can provide increases in engine efficiency. Automobile bodies are being manufactured using space-derived metal alloys or plastic composites - lending increased strength at lower weights.

Most important may be space-derived ways of powering vehicles. In November 2001 an ESA-sponsored vehicle won the World Solar Challenge across Australia, fitted with solar power cells built for the Hubble Telescope.

"Solar power also has more practical applications, though not alone," explained Brisson. "It could be a component of a hybrid or tribrid vehicle, also using power sources like hydrogen fuel cells or LPG (liquefied petroleum gas) as well as gasoline." A LPG racing car is to be exhibited at ESOC in Darmstadt.

The November conference is intended to facilitate the process of automotive technology transfer, with more than 150 attendees. It is part of a larger effort to take advantage of space technology in other areas. ESA has already carried out more than 120 successful technology transfers over the last decade. For more information, contact:

Dr Thomas Altmann
MST Aerospace Gmbh
Eupener Strasse 150, D-50933 Köln, Germany
Tel: +49 (0) 221 9498 9223
email: office@mst-aerospace.de
URL: http://www.technology-forum.com

Dr Pierre Brisson
Head of Technology Transfer and Promotion Office
European Space Agency - ESTEC
Keplerlaan 1, PO Box 299, NL-2200 AG Noordwijk, The Netherlands
Tel: +31 (0) 71565 4929
email: pierre.brisson@esa.int
URL: http://www.esa.int/technology

European Space Agency
http://www.esa.int/export/esaCP/index.ht ml

登录 或者 注册 以便阅读全文。

请先注册再进行下一步

获得一个月的无限制地在线阅读网站内容。只需注册并完成您的职业简介.

注册是免费的,而且非常简单。一旦成功注册,您可以每个月免费阅读3篇文章。:

  • 获得编辑推荐文章
  • 率先获得泰晤士高等教育世界大学排名相关的新闻
  • 获得职位推荐、筛选工作和保存工作搜索结果
  • 参与读者讨论和公布评论
注册

欢迎反馈

Log in or register to post comments

评论最多

Recent controversy over the future directions of both Stanford and Melbourne university presses have raised questions about the role of in-house publishing arms in a world of commercialisation, impact agendas, alternative facts – and ever-diminishing monograph sales. Anna McKie reports

3 October