Space technology goes down to Earth to support mining

January 5, 2004

Paris, December 30, 2003

Space exploration and underground mining both take place in extreme environments – so perhaps it is not too surprising that technology developed for one field is now being applied to the other.

ESA's Technology Transfer Programme is accelerating space technology spin-offs to the mining and the minerals industry sector. In a recent workshop with representatives from the sector, several potential areas were identified as being suitable for cooperation.

"Today 7% of our completed technology transfers have been to the mining and smelting industrial sector, so we know it is an area where advanced technologies have the potential to improve both industrial performance and working conditions for the employees," says Pierre Brisson, Head of ESA's Technology Transfer and Promotion Office.

"To take this a step further and to accelerate the spin-off process we decided to bring together industrial key players in the mining industry with our technology experts. During the workshop several space technology areas were identified, which potentially could resolve common problems today in mining and mineral production."

The event was organised by ESA's Technology Transfer and Promotion Office and the European Mineral Resource RTD Council (EMiReC) with the support of the Thematic Network on European Sustainable Mining and Processing Industries (NESMI).

Altogether about 90 people participated in the workshop, with 35 from the mining and minerals industry sector. The rest were from non-mining companies already involved in the transfer of space technology to the sector and ESA specialists bringing expertise in specific space technology fields.

Chris Cross, Manager of Rio Tinto's External Research Programmes, participated to see what space technology could bring, his specific interest is robotic systems for underground mining. Rio Tinto, which is one of the leaders in mining operating worldwide, is strongly represented in North America and Australia and has mining operations for aluminium, copper, diamonds, coal, uranium, gold, industrial minerals and iron. Some of their activities, now done primarily by surface mining, are to be changed into underground mines and robotics may be a solution to automating production.

Others participants included Deutsche Steinkohle AG (DSK) which carries out hard coal mining in the Ruhr, Saar and Ibbenbüren districts of Germany; DMK Environmental Engineering from Utah, which assists clients in all aspects of environmental engineering; Shell International, a global group of energy and petrochemical companies with operations in over 145 countries; and Gullivare Hard Rock Research (NGRR) from Sweden.

"We are looking for sensors and processing methods to determine, early in the mining process, the exact content of the mined stones to optimise mineral processing, such as stone crunching," said Åsa Sundqvist, Project Manager from NGRR.

ESA presented several advanced technologies identified as potential candidates for use in the mining industry, such as space robotics for planetary surface exploration, life support systems, and the Galileo and EGNOS navigation systems.

"The miner and the astronaut both work in equally harsh environments, although in very different ways," said Geoff Liggins from C-Core in Canada, which works with ESA's Harsh Environment Initiative (HEI), which transfers technologies from space to sectors such as oil, gas, mining and tunnelling.

"The key is know-how. Typically the technology itself, in the form that is supplied in space, cannot be directly applied to industry but the know-how and expertise to develop that technology is of great value."

Inspecting for cracks in concrete tunnels or the rock walls of mines can now be done by CRIS, which was developed under HEI and uses sophisticated ground penetration radar techniques to detect the cracks.

"The history of CRIS began back in 1994 with Ginger, a guidance ground penetration radar we developed for ESA, and which was planned to go on a planetary rover on the Moon or Mars," said Gunnar Triltzsch from Radar System Technik GmbH from Germany. "In 2000 we used the same technology to build CRIS, to identify cracks in a hard rock environment." The handheld device has been successfully tested and demonstrated in Canadian mines.

Stefano Carosio from D'Applolonia S.A. in Italy illustrated another technology transfer project for shape memory alloys, a special metal which reverts to a previous shape when heated. For satellites this material is used to unfold solar panels after launch. The same material can now be used to split rocks very precisely.

Technologies from the Smart-1 lunar mission, Mars Express and Venus Express were also presented and illustrated a variety of innovations developed by ESA to overcome challenges in exploring other planets such as searching, digging, extracting and examining minerals and regolith samples on other planets. These tools and techniques could have similar potential back on Earth.

"The summing-up session made it clear that there were common interests between the mining industry and space," said David Raitt, ESA's Senior Technology Transfer Officer.

Christian Fouillac, President of EmiReC, noted "the technologies developed by the space industry show some promising characteristics for us. One example is mineralogy and chemical analysis by remote spectrometry for mapping materials. Another point is material performance. We have also seen space systems for drilling in hard rock conditions where the energy consumption of the drilling has been reduced to a very low level - this is very attractive for us."

"Other areas of special interest are the handling of waste water and waste treatment contamination, and gas detection systems used in the life support programme developed by the space industry. We want to evaluate how to transfer this to increase safety in underground mines."

In reply to Raitt's question "How does the space technology compare to the technology already used in the mining industry?" Karsten Jäger from Deutsche Steinkohle AG (DSK) answered, "for mines keep it simple and strong. We need less precise but more robust technology, although strong developments in mining are towards automating operations with remote control. All techniques have to be cost effective on the one hand and very robust on the other. I feel that direct transfer of technology from space to underground is not so easy as it looks. There are some possibilities, and we will have a study next year, together with MST, to start looking for technologies to come inside our operations." MST Aerospace is ESA's Technology Transfer broker in Germany.

Corina Hebestreit, Secretary General of Euromines - the European Association of Mining Industries, said, "a lot of the space technologies are of interest to the mining industry and we would like to continue to work with ESA on this by holding brainstorming sessions on dedicated topics involving specialists from both sides."

In his conclusion, David Raitt noted that it was one of several similar events and one that showed great promise – not least because of the high degree of interest and participation from the mining and mineral processing sector, as well as from ESA departments themselves. Since the workshop took place there have already been several initiatives and follow-ups which will ensure a durable cooperation.

European Space Agency
http://www.esa.int/export/esaCP/index.ht ml
Item source: http://www.esa.int/export/esaCP/SEMA8V 4OD_index_0.html

Register to continue

Why register?

  • Registration is free and only takes a moment
  • Once registered, you can read 3 articles a month
  • Sign up for our newsletter
Register
Please Login or Register to read this article.

Sponsored