Arianespace Flight 157 - Inquiry Board submits findings

一月 9, 2003

Paris, 08 Jan 2003

Arianespace press release, Paris 7 January 2003. The Inquiry Board appointed to investigate the failure of Flight 157 submitted its report to Arianespace on January 6, 2003. The board was named last December 13 to establish the causes of the anomaly during the flight of an Ariane 5 ECA on the night of December 11-12, 2002.

As requested, the board established the most probable cause for the mission failure, examined possible consequences for the baseline Ariane 5 launcher version, and recommended actions to correct the problems that occurred during the Ariane 5 ECA flight.

Arianespace has accepted all the recommendations of the board, and will prepare an action plan by January 20 to enable a return to service of the Ariane 5 ECA during the second half of 2003.

Cause of the failure

A complete analysis of all measurements recorded during Flight 157 was carried out, along with a review of documentation concerning production, quality and technical records for the Ariane 5 ECA, as well as for all Ariane 5 flights to date. Also reviewed by the board was the work of production and development teams in Europe. The board's findings confirm that all preparatory and countdown operations for Flight 157 went normally, as did the flight sequence until the separation of the solid boosters.

The report of the Inquiry Board did identify the occurrence of a leak in the of the Vulcain 2 nozzle's cooling circuit during this first flight phase, followed by a critical overheating of the nozzle – which led to a loss of its integrity. This resulted in a major imbalance in the thrust of the Vulcain 2 engine due to the nozzle's deterioration, leading to a loss of control over the launcher's trajectory.

In conclusion, the most probable cause of the failure of Flight 157 was the simultaneous occurrence of two aggravating factors:

the degraded thermal condition of the nozzle due to fissures in the cooling tubes

non-exhaustive definition of the loads to which the Vulcain 2 engine is subjected during flight

The board also noted that it would be difficult to simulate these additional loads during ground tests.

Consequences for the Ariane 5 Baseline

The designs of nozzles on the Ariane 5 Baseline's Vulcain 1 engine and the Vulcain 2 engine for Ariane 5 ECA differ in two main ways:
the shape of the cooling tubes, which form the structure of the nozzle
the technology of the nozzle's stiffeners

After reviewing operating data from the Vulcain 1 engine's 12 successful flights, the Inquiry Board did not identify any weaknesses concerning the functioning and resistance of its nozzle. The Inquiry Board nevertheless requested an exhaustive examination of the behavior of the Vulcain 1 engine nozzle, including precise modeling to demonstrate the component's correct behavior during the flight. These verifications currently are in progress.

Consequences for Ariane 5 ECA

The Inquiry Board requested that the following actions be taken:
modification of the Vulcain 2 nozzle, taking into account experience acquired with the Vulcain 1 engine nozzle
assessment of possibilities for simulation during ground tests of loads observed during actual flight on the Vulcain 2 engine
enhancing of the quality of flight equipment.

Consequences for Rosetta launch

In view of the specific factors involved in this flight, Arianespace has decided to create a Review Board to make a decision on Tuesday, January 14 regarding the mission's launch date.

Upcoming Arianespace launches

February 11: Ariane 4

Second half of February: an Ariane 5 Baseline launcher version

European Space Agency
http://www.esa.int/export/esaCP/index.ht ml

请先注册再继续

为何要注册?

  • 注册是免费的,而且十分便捷
  • 注册成功后,您每月可免费阅读3篇文章
  • 订阅我们的邮件
注册
Please 登录 or 注册 to read this article.