East African University Rwanda

Schemes of Service: Research Division: Food, Chemical and Biotechnology Employment Type: Fixed Term About the Project The opening is for a project funded by the National Research Foundation (NRF). The project supports Singapore’s commitment to sustainability and carbon reduction. As a country with limited natural resources, Singapore is investing in innovative carbon dioxide (CO2) utilization technologies to reduce emissions and enhance energy security. This research aims to develop an integrated process for converting CO2 into valuable chemicals using renewable energy. The approach combines biotechnological and electrocatalytic processes to efficiently transform CO2 into useful chemicals, providing a novel and sustainable pathway for chemical manufacturing. The project is led by Dr. Zhou Kang at the Singapore Institute of Technology (SIT), with research strengths in metabolic engineering, microbial biomanufacturing, and sustainable process development. One Research Fellow will be hired to support the microbial engineering and bioprocess development aspects of the project: The Research Fellow will work under Dr. Zhou Kang at the Singapore Institute of Technology (SIT). This role focuses on producing platform aromatics from C2 building blocks using engineered microbial strains, pathway engineering, and fermentation strategies. The successful candidate will play a crucial role in advancing the project towards a lab-scale demonstration of an integrated CO2-to-chemicals process. Key Responsibilities Conduct independent laboratory research related to microbial fermentation, strain engineering, and biotransformation. Develop and optimize microbial strains, biosynthetic pathways, and cultivation strategies to improve efficiency and product yield. Design and support the integration of biotechnological processes into a continuous lab-scale system. Characterize and analyze chemical and biological products using advanced analytical techniques. Collaborate closely with project team members and external collaborators across metabolic engineering, biocatalysis, and related disciplines. Document research findings, prepare technical reports, contribute to scientific publications, and help supervise junior researchers or students when needed. Qualifications & Experience PhD degree in Chemical Engineering, Biotechnology, Microbiology, Biochemistry, Synthetic Biology, or a related field. Demonstrated research experience in one or more of the following areas: microbial fermentation, metabolic engineering, biotransformations, or bioprocess development. Hands-on experience with genetic engineering, molecular biology techniques, and strain construction is highly desirable. Strong problem-solving skills, critical thinking, and the ability to work independently while contributing effectively to collaborative projects. Excellent communication skills and the ability to work in a multidisciplinary research environment. A strong publication record or clear evidence of research productivity will be an advantage. Our lab uses Python, MATLAB and C++ to automate both data analysis and process control. Knowledge in these tools as well as emerging agentic AI will also be an advantage.  Professional Development The initial contract will be for one year, with the possibility of renewal for up to three years based on performance and project needs. The Research Fellow will have opportunities to lead publications, present at conferences, and build an independent research profile within the project. The role offers strong exposure to interdisciplinary collaboration in sustainable chemical manufacturing and carbon utilization research. The project may lead to forming a start-up on manufacturing specialty chemicals in Singapore. The start-up will be led by members of this project. Why Join the Team? Work on a cutting-edge project funded by the National Research Foundation (NRF) with impact on CO2 utilization. Contribute to Singapore’s sustainability and carbon reduction initiatives. Be part of a dynamic research team led by Dr. Zhou Kang in metabolic engineering and sustainable biomanufacturing. Gain valuable experience in an emerging field with applications in sustainable chemical manufacturing. Opportunities to contribute to high-impact publications and attend international conferences. Join the team in shaping the future of sustainable chemical production!

Salary: £35,608 - £43,482 per annum Contractual hours: 37 Basis: Full Time Package: Full details can be found here - https://www.ucb.ac.uk/about-us/work-for-us/rewards-and-benefits/ Job category/type: Academic, Engineering, Further Education Job reference: REQ000536 Attachments: attachmentLecturer in Engineering - JDPS - April 26.pdf Do you have experience teaching in Engineering in Further Education? University College Birmingham is looking for a Lecturer in Mechanical or Electrical or Mechatronics Engineering. The department has state of the art equipment in controls systems and smart factories robotics, pneumatics and hydraulic, fluid mechanics, programmable logic controllers and microprocessors. The role will include planning, developing and delivering high quality, inspiring and inclusive learning opportunities for students to help them achieve their learning goals. This is a fantastic opportunity for someone who is eager to contribute to the world of academia, inspire students, and actively participate in the vibrant academic community we foster. Standard Information UCB is an equal opportunities employer. University College Birmingham is proud to be TEF rated Silver, with a Good Ofsted rating UCB has achieved the Investors in Diversity Bronze Award. You may need to obtain permission to work in the UK if you don’t already have the unrestricted right to work in any role. There are various types of visa which include the right to work. You can check if you need a UK visa using the Government’s online tool and find information about UK visa routes and the eligibility criteria that must be met for each route Work in the UK - GOV.UK (www.gov.uk). All staff are required to prove their right to work in the UK before they start work. All applicants for employment at the University will be expected to undertake an Enhanced Check with the Disclosure and Barring Service prior to commencement. All applicants for employment at the University will be expected to demonstrate an understanding of the principles of Safeguarding and the PREVENT agenda in the context of further and higher education.  

Faculty or Department: Faculty of Engineering and Applied Sciences Based at: Cranfield Campus, Cranfield, Bedfordshire Hours of work: 37 hours per week, normally worked Monday to Friday. Flexible working will be considered Contract type: Fixed term contract Fixed Term Period: For 12 Months Salary: Full time starting salary is normally in the range of £37,897 Apply by: 31/05/2026 About the Role This is a one year research-focused position, with the potential for extension, entails advancing the state-of- the-art in Directed Energy Deposition Additive Manufacturing (DEDAM), with a primary emphasis on the development of multi-material systems and high-performance metallic structures. You will spearhead experimental campaigns to evaluate process stability and material integrity, pioneering novel material combinations such as metal-metal composites and metal-composite joining techniques. By collaborating with a multidisciplinary team to push the boundaries of large-scale additive manufacturing, you will integrate process digitalisation with rigorous experimental design. Key responsibilities involve the manufacture of high-quality specimens for characterisation by research partners and the systematic analysis of experimental data to establish fundamental correlations between process parameters, microstructures, and mechanical properties. Ultimately, this work aims to refine DEDAM processes to ensure that fabricated components are meticulously optimised for specific mechanical load scenarios, with a particular interest in candidates capable of implementing advanced monitoring and automation frameworks to enhance system integration and data-driven insights. About You You will hold a PhD (or be close to completion) in in Mechanical Engineering, Materials Science, Manufacturing Engineering, or a related technical field. You must have demonstrable relevant experience and achievements in process development and material characterisation. You will also possess proven knowledge of monitoring and control system development within the metal AM process. In addition, you will have a developing track record of publishing in high-quality journals, along with excellent communication, planning, and organisational skills, and a proven ability for problem-solving. You will also require Baseline Personnel Security Standard (BPSS). About Us As a specialist postgraduate university, Cranfield’s world-class expertise, large-scale facilities and unrivalled industry partnerships are creating leaders in technology and management globally. Learn more about Cranfield and our unique impact here. Cranfield’s research and educational excellence is recognised internationally and is brought together in the Faculty of Engineering and Applied Sciences. The faculty hosts the associated core research and education ‘Themes’ which in turn host a number of world-class centres and institutes. The themes define their own research challenges and educational missions, with the Directors of Theme working closely with the Deputy Vice-Chancellor (FEAS). Cranfield Manufacturing Materials and Design community are recognised for the delivery of niche postgraduate research, education, and consultancy. We are unique in our multi-disciplinary approach to innovation and problem solving for industry, bringing together design, materials’ technology, and management expertise to create smart, clean, and green solutions with Net Zero UK 2050 in mind. Our Values and Commitments Our shared, stated values help to define who we are and underpin everything we do: Ambition; Impact; Respect; and Community. Find out more here. We aim to create and maintain a culture in which everyone can work and study together and realise their full potential. We are a Disability Confident Employer and proud members of the Stonewall Diversity Champions Programme. We are committed to actively exploring flexible working options for each role and have been ranked in the Top 30 family friendly employers in the UK by the charity Working Families. Find out more about our key commitments to Equality, Diversity and Inclusion and Flexible Working here. Working Arrangements Collaborating and connecting are integral to so much of what we do. Our Working Arrangements Framework provides many staff with the opportunity to flexibly combine on-site and remote working, where job roles allow, balancing the needs of our community of staff, students, clients and partners. How to apply For an informal discussion about this opportunity, please contact Dr Jian Qin, Lecturer in Digitalisation for Metal Additive Manufacturing, on (E): J.Qin@Cranfield.ac.uk Dr Wojciech Suder, Senior Lecturer in Laser Processing and Additive Manufacturing, on (E): w.j.suder@cranfield.ac.uk Please do not hesitate to contact us for further details on E: hrrecruitment@cranfield.ac.uk. Please quote reference number 5301. Closing date for receipt of applications: 31 May 2026 Please note that we reserve the right to close this advert prior to the stated closing date should we receive sufficient numbers of applications. Therefore, we would encourage you to complete and submit your application as soon as possible.