About the job
About METRAMAT project
We are looking for a PhD candidate for one of the ten PhD positions in METRAMAT project; a European Doctoral Network funded by the European Commission under the Horizon 2022 Marie Sklodowska-Curie Action (MSCA). The main objective of METRAMAT Doctoral Network project is to actively train young researchers to become skilled in metamaterial development by researching and creating a combined set of design, simulation, manufacturing, testing, reliability assessment and integration tools that will strengthen the European manufacturing industry and lead to a sustainable society.
The manufacturing industry is fundamental to the technological sovereignty and competitiveness of the European economy. To maintain the leading position, the sector requires continuous innovations, exploring the limits of material properties. This is particularly the case in high-end technology applications, such as lithography machines and micro-electromechanical systems (MEMS) industry, where the limits of conventional materials come into sight. Metamaterials, built up from rationally, pre-designed architected substructures, hold the promise to outperform conventional materials and redefine the boundaries of industrial design practices. The metamaterial potential can drive the much-needed transformational changes in European manufacturing industry. However, the wide-spread use of metamaterials is hindered by the lack of knowledge of (i) design-for-production principles for metamaterials, (ii) integration at component and system level and (iii) design-for-reliability of metamaterials. METRAMAT will train and deliver 10 researchers skilled in metamaterial development by researching and creating a combined set of design, simulation, manufacturing, testing, reliability assessment and integration tools. The involvement of MEMS, lithography and additive manufacturing industries ensures that scientific training is tuned to existing industrial challenges requiring new fundamental solutions, such as positioning accuracy, sensor sensitivity or shielding of external vibrational disturbances, with emphasis on design for manufacturability and reliability. Together with the transferable skills training, secondments and network, this will provide the doctoral candidates a strong basis for a successful career in industry or academia. The new scientific insights, engineering tools and educational programs to be developed within METRAMAT program will pave the way to wide-spread manufacturing and application of metamaterials in European industry, elevating it to the next level.
For additional information about the METRAMAT project, please visit the project website.
Description of the PhD position
Objectives: Multi-scale assessment and understanding of mechanical and fatigue properties of metallic metamaterial structures produced in DC5 project, under uniaxial quasi-static, cyclic and vibrational loading conditions by microstructure sample characterization prior to the testing, in-situ during testing and post-mortem. Establishment of quantitative representation of design-fabrication-fatigue performance link and failure risk assessment procedures for metal 3D printed metamaterials.
Expected results: Understanding of the multi-scale deformation and failure mechanisms in metal 3D printed metamaterials under static, cyclic and vibrational loads. Qualitative and quantitative representation of design-fabrication-fatigue performance link. Fatigue properties in the form of life and strength to be used as input for theoretical failure prediction tools for optimization the metamaterial designs. For a position as a PhD Candidate, the goal is a completed doctoral education up to an obtained doctoral degree.
Planned secondments: Academic: KUL, 3 months, design and fabrication of samples in lab conditions; Industrial: KMWE, 3 months, design and fabrication of samples in industrial setting.
You will report to Associate Professor Nima Razavi.
Duties of the position
- you will have experience with AM fabrication of lattice structures
- performing mechanical tests such as tensile, fracture and fatigue tests on lattice structures
- microstructural analysis of the chosen alloys for fabrication of lattice structures
- application of advanced damage detection methods for structural integrity assessment
- application and development of novel local approaches for failure prediction
- performing advanced numerical analysis with the aim of failure prediction
Required selection criteria
- professionally relevant background within one or more of the following subject areas: Mechanical/civil/aerospace/processing/Industrial engineering, and/or Materials technology
- your education must correspond to a five-year Norwegian degree program, where 120 credits are obtained at the master's level
- you must have a strong academic background from your previous studies and an average grade from the master's degree program, or equivalent education, which is equal to B or better compared with NTNU's grading scale. If you do not have letter grades from previous studies, you must have an equally good academic basis. If you have a weaker grade background, you may be assessed if you can document that you are particularly suitable for a PhD education
- you must meet the requirements for admission to the faculty's doctoral program
- excellent written and oral English skills
- strong background on solid mechanics and mechanics of materials
- excellent track record of academic achievement and a strong interest in conducting experimental and numerical research
The appointment is to be made in accordance with Regulations on terms of employment for positions such as postdoctoral fellow, Phd candidate, research assistant and specialist candidate and Regulations concerning the degrees of Philosophiae Doctor (PhD) and Philosodophiae Doctor (PhD) in artistic research national guidelines for appointment as PhD, post doctor and research assistant.
Preferred selection criteria
- good knowledge and experience in mechanical testing of materials or components
- experience in using Finite Element Codes such as ABAQUS, ANSYS, etc. for numerical analysis
- understanding basic principles of additive manufacturing and how the process conditions may alter the quality of AM parts
- the ability to conduct high quality research and publish results in acknowledged peer-reviewed journals is an asset
- knowledge of metallography and material science would be given additional credit in evaluation
- highly motivated, independent and enthusiastic
- strong ability to systematically carry out goal-oriented work
- enjoy interdisciplinary research
- keen interest in learning and working in teams
- good skills to deliver oral and written presentation of research results
In the evaluation of which candidate is best qualified, emphasis will be placed on education, experience and personal suitability, in terms of the qualification requirements specified in the advertisement.
Salary and conditions
As a PhD candidate (code 1017) you are normally paid from gross NOK 532 200 per annum before tax, depending on qualifications and seniority. From the salary, 2% is deducted as a contribution to the Norwegian Public Service Pension Fund.
The period of employment is 3 years.
Appointment to a PhD position requires that you are admitted to the PhD programme in Engineering within three months of employment, and that you participate in an organized PhD programme during the employment period.
Recruited researchers can be of any nationality and must comply with the following mobility rule: they must not have resided or carried out their main activity (work, studies, etc.) in the country of the recruiting beneficiary for more than 12 months in the 36 months immediately before their recruitment date. Compulsory national service, short stays such as holidays and time spent by the researcher as part of a procedure for obtaining refugee status under the Geneva Convention are not considered.
The engagement is to be made in accordance with the regulations in force concerning State Employees and Civil Servants.
After the appointment you must assume that there may be changes in the area of work.
The position is subject to external funding from the Horizon 2022 Marie Sklodowska-Curie Action (MSCA) for the METRAMAT project.
It is a prerequisite you can be present at and accessible to the institution daily.
About the application
The application and supporting documentation to be used as the basis for the assessment must be in English.
Publications and other scientific work must be attached to the application. Please note that your application will be considered based solely on information submitted by the application deadline. You must therefore ensure that your application clearly demonstrates how your skills and experience fulfil the criteria specified above.
The application must include:
- CV and certificates
- transcripts and diplomas for bachelor's and master's degrees. If you have not completed the master's degree, you must submit an official confirmation that the master's thesis has been submitted
- a copy of the master's thesis. If you recently have submitted your master's thesis, you can attach a draft of the thesis
- documentation of a completed master's degree must be presented in the application
- name and contact information of three referees and their recommendation letters for your application for this position (Note: the referees will also be directly contacted for shortlisted candidates for the position)
- motivation letter (Note: the motivation letter must be aligned with the subject of this call and why the candidate finds themselves suitable for this position. The candidates must include their plan of action for the first 30, 60, and 90 days of the PhD, aligned with the topic of the project)
- if you have publications or other relevant research work (the candidate’s contribution to each work must be clarified (performed tasks and percentage of contribution))
If all, or parts, of your education has been taken abroad, we also ask you to attach documentation of the scope and quality of your entire education, both bachelor's and master's education, in addition to other higher education. Description of the documentation required can be found here. If you already have a statement from NOKUT, please attach this as well.
We will take joint work into account. If it is difficult to identify your efforts in the joint work, you must enclose a short description of your participation.
In the evaluation of which candidate is best qualified, emphasis will be placed on education, experience and personal and interpersonal qualities. Motivation, ambitions, and potential will also count in the assessment of the candidates.
NTNU is committed to following evaluation criteria for research quality according to The San Francisco Declaration on Research Assessment - DORA.
Applicants invited for interview must include certified copies of transcripts and reference letters.
Recruitment Committee will select suitable candidates for a first round based on academic formation, professional and/or research experience, motivation and references. Selected candidates will be given a short assignment related to the topic of the project to evaluate analytical abilities and level of written English, followed by interviews. Interviews will take place online to provide equal opportunities to all candidates independent of their location. Interviews will take place in January 2024 and appointment start can be between March and August 2024.
As equal opportunity employers, we strive to increase the number of women working in the field advertised. Female candidates are encouraged to apply; your recruitment committee will consist of at least one female researcher. Furthermore, there is the possibility of flexible working hours for family circumstances, and most campuses have child care availability. In the recruitment process measures will be taken to ensure that equal opportunities criteria in the selection process are applied, irrespective of gender, disability, marital or parental status, racial, ethnic or social origin, colour, religion, belief, or sexual orientation. In case of disability, a special needs allowance is available from the EU to ensure adequate participation in the action.
More information on the METRAMAT project, other DC vacancies and selection procedure can be found on the METRAMAT website.
Working at NTNU
NTNU believes that inclusion and diversity is our strength. We want to recruit people with different competencies, educational backgrounds, life experiences and perspectives to contribute to solving our social responsibilities within education and research. We will facilitate for our employees’ needs.
NTNU is working actively to increase the number of women employed in scientific positions and has a number of resources to promote equality.
The city of Trondheim is a modern European city with a rich cultural scene. Trondheim is the innovation capital of Norway with a population of 200,000. The Norwegian welfare state, including healthcare, schools, kindergartens and overall equality, is probably the best of its kind in the world. Professional subsidized day-care for children is easily available. Furthermore, Trondheim offers great opportunities for education (including international schools) and possibilities to enjoy nature, culture and family life and has low crime rates and clean air quality.
As an employee at NTNU, you must at all times adhere to the changes that the development in the subject entails and the organizational changes that are adopted.
A public list of applicants with name, age, job title and municipality of residence is prepared after the application deadline. If you want to reserve yourself from entry on the public applicant list, this must be justified. Assessment will be made in accordance with current legislation. You will be notified if the reservation is not accepted.
If you have any questions about the position, please contact Associate Professor Nima Razavi, email firstname.lastname@example.org. If you have any questions about the recruitment process, please contact HR consultant Hedda Winnberg, e-mail: Hedda.email@example.com.
If you think this looks interesting and in line with your qualifications, please submit your application electronically via jobbnorge.no with your CV, diplomas and certificates attached. Applications submitted elsewhere will not be considered. Upon request, you must be able to obtain certified copies of your documentation.
Please refer to the application number IV-136/23 when applying.
Application deadline: 07.01.2024
NTNU - knowledge for a better world
The Norwegian University of Science and Technology (NTNU) creates knowledge for a better world and solutions that can change everyday life.
Department of Mechanical and Industrial Engineering
We educate graduates who can create new products, operate and maintain products, and manage projects. The Department has a variety of bachelor’s and master’s degree programmes. We conduct wide-ranging research in fields such as technology, energy, product quality and development, and productivity. The Department of Mechanical and Industrial Engineering is one of eight departments in the Faculty of Engineering.
Deadline 7th January 2024
Employer NTNU - Norwegian University of Science and Technology
Place of service Richard Brikelands vei 2B, 7034 Trondheim