PhD Position, Department of Energy and Process Engineering
PhD position in mixing and entrainment across interfaces in multi-phase flows using advanced laser diagnostics (IV-213/19)
About the position
A PhD position is available in experimental fluid mechanics at the Department of Energy and Process Engineering, in the Thermo-Fluids research group. The appointment has a duration of 3 years at the end of which the candidate is expected to defend a PhD thesis. The position is financed by the Research Council of Norway through the KPN project NON-DSR-SLUG (project no. 280610) led by Sintef Industry.
The aim of the project is to investigate mixing, entrainment and secondary flows between the air-liquid interface in multi-phase pipe flow using advanced laser imaging techniques. Due to the change of refractive index across the air-liquid interface, measuring the flow is fundamentally challenging and has therefore limited our ability to model and predict these flows. By employing multiple advanced diagnostic methods, the aim is to advance our ability to measure multiphase flows in more detail in order to improve our understanding of interfacial flows and the formation of instabilities which of both practical and fundamental interest.
The head of the department is Professor Terese Løvås. The position's supervision is by Professor James Dawson.
Please read this entire posting before applying for this position as incomplete applications may not be considered.
Main duties and responsibilities
Research activities will be primarily based at the Department of Energy and Process Engineering. The successful candidate will combine fundamental knowledge in fluid mechanics with their practical and analytical skills to develop new time-resolved measurement approaches using state-of-the-art, high-speed laser diagnostics, in particular particle image velocimetry and planar laser-induced fluorescence as well as more standard methods. They must be able to work independently and will be responsible for setting-up and performing experiments as well as the development and application of advanced data processing under the guidance of the project supervisor. The successful candidate will join an internationally active research group in fluid mechanics with experienced post-doctoral researchers as well as PhD students working across a wide variety of fluid mechanics problems. They will be expected to publish their research in internationally leading scientific journals and present their work at international conferences.
Suitable experience in experimental, theoretical or numerical methods in fluid mechanics will be considered beneficial but not the use of commercial CFD software packages.
The expected start date is as soon as possible.
The PhD-position's main objective is to qualify for work in research positions. The qualification requirement is completion of a master’s degree or second degree (equivalent to 120 credits) with a strong academic background in fluid mechanics or classical mechanics with a grade of B or better in terms of NTNU’s grading scale. Applicants with no letter grades from previous studies must have an equally good academic foundation. Applicants who are unable to meet these criteria may be considered only if they can document that they are particularly suitable candidates for education leading to a PhD degree.
The appointment is to be made in accordance with the regulations in force concerning State Employees and Civil Servants and national guidelines for appointment as PhD, postdoctor and research assistant
NTNU is committed to following evaluation criteria for research quality according to The San Francisco Declaration on Research Assessment - DORA.
- Strong background in applied and/or engineering mathematics
- Strong background in fundamental fluid mechanics.
- Strong programming skills in MATLAB, Python, or similar packages.
- Excellent practical and problem solving skills
- Experience conducting fluids experiments (e.g., hot-wire anemometry, particle image velocimetry, laser-Doppler anemometry, high-speed imaging).
- Scientific reports and papers are written in English, and thus strong command of the English language is required (demonstrated by works written in English, application correspondence and language, and/or certified English tests).
Desired additional qualifications:
- Experience with CAD software packages (e.g., SolidWorks, Fusion360, NX).
- Experience as part of a design team or project.
- Previous experience writing and contributing to peer-reviewed journal articles
- Enthusiastic, ability to adapt and learn.
- Highly motivated.
- Works effectively in teams and individually.
- Able to operate in a goal-oriented manner.
In the evaluation of which candidate is best qualified, emphasis will be placed on education, experience and personal suitability, as well as motivation, in terms of the qualification requirements specified in the advertisement
- world-class experimental laboratories
- state-of-the-art experimental measurement equipment
- a strong group of researchers focused on fluid mechanics
- exciting and stimulating tasks in a strong international academic environment
- an open and inclusive work environment with dedicated colleagues
- favourable terms in the Norwegian Public Service Pension Fund
- employee benefits
Salary and conditions
PhD candidates are remunerated in code 1017, and are normally remunerated at gross from NOK 479 600 before tax per year. From the salary, 2 % is deducted as a contribution to the Norwegian Public Service Pension Fund.
The period of employment is 3 years without required duties. Appointment to a PhD position requires admission to the PhD programme in Engineering. Please see https://www.ntnu.edu/studies/phiv for more information.
As a PhD candidate, you undertake to participate in an organized PhD programme during the employment period. A condition of appointment is that you are in fact qualified for admission to the PhD programme within three months.
The engagement is to be made in accordance with the regulations in force concerning State Employees and Civil Servants, and the acts relating to Control of the Export of Strategic Goods, Services and Technology. Candidates who by assessment of the application and attachment are seen to conflict with the criterias in the latter law will be prohibited from recruitment to NTNU. After the appointment you must assume that there may be changes in the area of work.
A good work environment is characterized by diversity. We encourage qualified candidates to apply, regardless of their gender, functional capacity or cultural background. Under the Freedom of Information Act (offentleglova), information about the applicant may be made public even if the applicant has requested not to have their name entered on the list of applicants.
Questions about the position can be directed to Professor James Dawson, phone number +4791897437, e-mail email@example.com
About the application:
Publications and other academic works that the applicant would like to be considered in the evaluation must accompany the application. Joint works will be considered. If it is difficult to identify the individual applicant's contribution to joint works, the applicant must include a brief description of his or her contribution.
Please include the following with your application:
- A “research statement” briefly describing your Masters research or other previous research experience. This document should not exceed 1 page.
- A “qualifications” document explicitly listing each of the above qualifications and briefly describing how you meet each of the “required” qualifications and some or all of the “desired” qualifications. This document should not exceed 2 pages.
An application missing these two documents may be considered incomplete by the selection committee.
Please submit your application electronically via jobbnorge.no with your CV, diplomas and certificates.
Transcripts of grades are required for all candidates. If you are applying from outside Norway, please include a document detailing the grading/credit equivalencies to the Norwegian or ECTS systems. If this is not available, then please include a document describing the grading system at your university and the requirements for degree completion. This can be a print-out from your university’s webpage or in some cases is included on your actual transcript. If your transcript does not include an average grade for the last two years of your education, please calculate it and include it in your application. Applications without this supporting material may not be considered.
Applicants invited for interview may be asked to complete additional preparatory tasks and must include certified copies of transcripts and reference letters. Please refer to the application number IV-213/19 when applying.
Application deadline: 15.08.19
NTNU - knowledge for a better world
The Norwegian University of Science and Technology (NTNU) creates knowledge for a better world and solutions that can change everyday life.
Department of Energy and Process Engineering
We conduct research and teaching covering the entire energy chain, from resources to the end-user. We look at how energy is produced and used by humans and machines in a sustainable way with regard to health, climate change and the resource base. The Department of Energy and Process Engineering is one of eight departments in the Faculty of Engineering.